EMT Practice Test

1. Question Content...

---

Question1: A customer has two HPE Nimble arrays that are replication partners. The customer suffers a complete outage on the source array. What does the administrator need to do to make the most recent snapshot available?

Question2: Which advantage does InfoSight for HPE Storage deliver to a customer?

Question3: A customer needs lo replace an existing Dell EMC backup-to-disk solution with an HPE solution to integrate with an HPE 3PAR solution.
Which toot should you use lo begin your assessment of the customer environment?

Question4: You want to use FCAP authentication in an environment with FOS 7.3 running switches with no extra licenses.
What should you do to use this feature?

Question5: A customer needs to replicate multiple HPE 3PAR source arrays to a single HPE 3PAR target array at a Disaster Recovery sue.
What is required to support a 31 fan-in for Remote Copy?

Question6: A customer needs to analyze performance and capacity of their storage environment. Their environment
consists of HPE 3PAR, EMC VNX, and Pure Systems.
Which tool should you use to begin your assessment of their environment?

Question7: You are designing an HPE 3PAR replication solution for a customer in a metropolitan area that includes two main sites and a third disaster recovery site. The main sites will be in synchronous replication. The disaster recovery site can be asynchronously replicated.
What are two points you should highlight to the customer? (Select two.)

Question8: A customer's primary and OR datacenter are over 700 km apart. The customer wants to minimize data loss during a OR failover, but is worried about the potential production IO performance impact of replicating their data.
You recommend HPE 3PAR asynchronous replication.
Which key factor should you explain about the proposed solution?

Question9: Refer to the exhibit.

A customer requests a solution for two 3PAR 8450 storage arrays using synchronous replication. The customer wants the array configured to...
A junior architect you are coaching created the configuration shown for each array
What should you add to me configuration for each array to meet customer performance requirements?

Question10: A customer has three 4-node HPE 3PAR arrays. Two of the arrays are deployed at a primary site, and the third array is deployed at a disaster recovery site. Both arrays at the primary site are replicated to the single array at the disaster recovery site.
All replication is asynchronous periodic. All arrays are utilizing 4 RCIP links for replication.
The customer needs to add a third array at the primary site. They would like to use the existing array at the disaster recovery site as a replication target for this additional array.
What must the architect consider to meet this customer requirement?

Question11: Refer to the exhibit.

A customer is considering a new HPE 3PAR for the purpose of implementing deduplication and compression. Based on the output returned from the NinjaCrawler tool, what do you know about the customer data?

Question12: You receive an error when attempting to utilize SAF Analyze to upload customer data that you have collected
to develop reports for a new proposal. What must you do first to begin the process?

Question13: How does the HPE Storage strategy support the business need for intelligent storage?

Question14: Refer to the exhibit.

A customer requests a quote for an HPE 3PAR 9450 array. The customer will provision a single CPG using RAID 6 (6+2) arx1 require cage availability
What must De changed in the Bin of Materials shown to meet this requirement?

Question15: What is one of the advantages of protecting HPE 3PAR File Persona with RMC?

Question16: A customer wants an HPE 3PAR array with about 400,000 IOPS and over 6000 MBs per second through - put at 16K block size. What should you consider in your design?

Question17: A customer has an HPE 3PAR 8400 with two nodes installed. They plan to add a critical Oracle database to the array They need to ensure performance Is maintained during array OS upgrades. What should you recommend to the customer?

Question18: A customer has two HPE Nimble arrays that are replication partners. The replication schedule is set to every hour.
After replication completed at 1:00pm, the array at the primary site suffers a power failure.
Applications were failed over successfully by the administrators, and production continued on the secondary site array as designed.
At 3:00pm, the power was restored to the primary site array.
What does the administrator need to do first to restore services in the primary site?

Question19: A customer needs to replicate the data on their HPE 3PAR arrays between their datacenters. Their
datacenters are 250km apart. The link between the sites has an RTO of 100 ms, and they have an RPO of 3
minutes.
Which replication method should you recommend to meet the customer needs?

Question20: A customer uses HPE Nimble storage with replication in a VMware environment. The customer wants to implement the Site Recovery Manager plugin in vCenter server to able to create and test disaster recovery plans
Which software do they need to add to the SRM servers?

Question21: A customer has recently acquired another company that is located less than 3 km from their current main
location. Both locations use HPE B-Series products in their storage environment.
The customer needs to merge the 2 locations together while still using the current WAN and networking
infrastructure at both locations. They need to keep their initial cost down until they are able to redesign both networking infrastructures.
Which protocol should be incorporated when providing a proposal to meet the customer needs?

Question22: A customer has standardized on Windows Server. They need to ensure that application and storage will move between sites as one during automated or manual failover. Which HPE 3PAR integrated solution should you recommend to the customer as a preventative measure?

Question23: A customer requires a 5 PB object storage solution across two sites.
Which storage solution meets this requirement1?

Question24: Refer to the exhibit, which reflects the Bill of Materials (BOM) configuration for one datacenter.

A customer needs a new storage solution of two HPE 3PAR 8440 arrays. The customer's environment consists of eight physical servers in each data center attached to the SAN and one StoreOnce 3540 system with two FC I/O cards. The distance between data centers is less than 75 meters.
What should you add the BOM to meet the customer needs?

Question25: Match the HPE resource to Its source location.

Question26: A customer needs to replicate data from a single HPE 3PAR source array to multiple HPE SPAR target arrays. What is required to support a 3:1 fan-out for Remote Copy?

Question27: A customer has two HPE Nimble arrays that are replication partners. The replication schedule is set to every hour
After the replication completed at 1 00 pm. the array at the primary site suffers a power failure at 1:30(pm Applications were failed over successfully by me administrators, and production continued on the secondary site array as designed Power was restored to the primary site array at 3:00 pm
When the administrator restores the replication to the primary site, which data Is sent to the primary array?

Question28: A customer wants to use existing HPE B-series Gen5 Fibre Channel Fabric to implement RCFC between two HPE 3PAR arrays.
The solution architect must ensure that the latency and distance of the fabric between the 3PAR arrays can support synchronous replication.
Which tool can the architect use to perform this task?

Question29: Which HPE 3PAR functionality allows addition of data located on non-HPE storage systems to an HPE 3PAR Storage Federation?

Question30: A customer's fabric consists of HPE B-Series switches running Fabric OS 7.4. The customer recently closed a second datacenter and needs to repurpose the hpe c-series switches that were used at the second site.
What should you do to meet the customer's needs and maintain full fabric functionality?

Question31: A customer needs a data recovery solution for their HPE 3PAR array. They have the following requirements:
* RPO needs to be within three hours
* RTO needs to be within three hours
* There is no need for offsite data archive
* They will have a limited maintenance window
Which solution meets all of the customer needs?

Question32: A customer needs to replace outdated storage arrays.
Which resource provides the necessary information to properly size a solution?

Question33: A customer must replicate data between two main data centers while maintaining a copy of the data at a third site The current storage solution from another vendor can only replicate the data between two sites. The customer acquired a third data center, but bandwidth between the two main data centers and the third site is limited. Automatic transparent failover is only required between the two main data centers
You propose a solution consisting of three HPE 3PAR storage arrays and the 3DC Peer Persistence feature.
What should you emphasize during your presentation?

Question34: You are presenting a Remote Copy solution to a customer that expects to experience significant future growth During your presentation, the customer expresses concerns about future integrations of HPE 3PAR arrays into the replication solution.
How should you respond to address the customer concern?

Question35: A customer has a solution from another vendor. The customer ran into issues of a disproportionally high failure rate of media keeping logfile dat A.
The issue also appeared in the second array, to which the data is being replicated.
The customer specifically asks you for a solution that will not have this same issue. Which feature of HPE
3PAR arrays should you emphasize?

Question36: You are comparing Nimble features with other vendors. What should you point out to a customer regarding investment protection?

Question37: You are using NinjaStars to develop a proposal to refresh a customer's storage infrastructure.
Which information is needed from the existing environment to properly design a solution? (Select two.)